4 Gauge / 22" Positive Battery Cable - BMW Oilhead / EnDuraLast

BCK-PC22 4 Gauge / 22" Positive Battery Cable

Run this cable in parallel to the original wires which are part of the main harness. Vehicle Manufacturer: BMW Application: BMW Oilhead Models Make/Model: BMW R850, R1100, R1150, R1200 Power Rating: 4 Gauge Cable, 420 Wire Strands, 600 Volt Rated, = + 60% more copper, - 61% less resistance, + 75% ampacity Manufacturer #: Positive ( + ) Not available from BMW
Cable Length :
Positive ( + ) 56cm / 22 inches
4 Gauge 420 strand battery cable

Terminal Diameter :
Positive ( + ) Battery Terminal : 6mm / .25 inch
Terminal : 6mm / .25 inch

Features & Benefits of EnDuraLast Premium Quality 4 Gauge Battery Cable with 420 wire strands

Modernizes and Restores the motorcycle starting process to better than new

• Most vehicles will start in about a second
• Based on healthy battery voltage of 12.6 Volts at rest and 12+ Volts under load and healthy starter

Reduces Starter Strain

• Maximizes the life of your starter by minimizing low current and resulting high heat
• Eliminates long starter cranking periods

Improved Ground = Improved Charging and overall electrical system performance

• Brighter lights
• Better performance from all parts of the electrical system
• Starter cranking will be improved with higher torque output and increased cranking speed resulting in faster starting
• Reduces Battery Strain = Longer Battery Life

EnDuraLast Premium Quality 4 Gauge Battery Cables

• Deliver premium performance along with ease of installation
• Simple Installation
• No cutting of any wires
• Replace the negative ground lead
• Install positive battery starter solenoid lead
• If vehicle has positive battery-starter lead that is spliced into the main vehicle harness, install the positive battery lead in parallel to the starter
• Electrical current will flow through the larger gauge cable which has the path of least resistance


Euro MotoElectrics Designed & Engineered - Assembled in the USA

• Cables - 4 gauge copper cable / .380 outside diameter
  • More wire strands than typical battery cables – up to 8 times more
  • 420 wire strands / .011 diameter
  • U.S. A. Made, flexible, 100% stranded high purity copper
  • American-Made copper wire has been smelted and drawn under much cleaner conditions than conventional commercial grade copper
  • Thermoplastic elastomer - Pliable insulation for ease of installation in tight application bends
  • High temperature , oil and abrasion resistant insulation jacket (classic black insulating jacket, with no markings)
  • 600 volt maximum
  • Optimizes current flow efficiency
• Terminals - 100% copper with closed ends
  • Terminals are closed ended seal against the environment
  • Terminal joints are double high pressure crimped to maximize surface contact
  • Pull strength tested 420+ pounds
  • Heat shrink is double thick for water and air tight crimp connection to prevent corrosion and oxidation