Oil Cooler Upgrade Kit - BMW Airhead / Siebenrock

Oil Cooler Upgrade Kit - BMW Airhead / Siebenrock

Regular price
$555.80 USD
Sale price
$555.80 USD
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

OilCooler400 Vehicle Manufacturer: Application: Make/Model: Model Years: Manufacturer #:
(See APPLICATION TABLE tab BELOW to verify vehicle fitment) INSTALLATION INSTRUCTIONS

  • Place an oil pan or something similar under your engine before dismantling the bike.
  • Drain the oil from the engine oil sump
  • Mount the bracket with the clamp for the oil cooler in the center of the frame corss-member using the two enclosed M8x20 bolts and M8 washers.
  • Pull the clamp though before tightening it and mount the oil cooler on the pre-assembled bracket with the hose connections poingts facing downwards.
  • Using the two M6x20 bolts and M6 attach the oil cooler ensuring that the off-centre mount is rotated and facing forwards
  • Remove the oil filter and catch any remaining oil.
  • Replace the guide tube in the middle with the tube supplied - using a high-strength thread locker.
  • Note that the guide tube must protrude the housing by 3mm.
  • Install the oil filter and mount the new oil cover.
  • When installing the paper gasket and oil seal refer to the sequence shown on the paper installation instructions - the paper gasket is optional.
  • Now the hoses can be installed, routing the longer hose to the left-hand side of the vehicle
  • Screw the two oil hoses directly onto the oil cooler from below and tighten firmly.
  • Install the the two banjo bolts on the oil cover and tighten between 17-20 Nm.
  • Now align the oil cooler and the tighten the clamp.
  • Ensure that teh hoses and cooler do not interfere with the freedom of movement of the mudguard.
  • Secure the two hoses with the enclosed cable ties to ensure there is no contact with the
  • Extend the horn wiring harness using the enclosed wire and heat shrink hose and connectors to mount the horn on the left side.
  • Insert oil and top-up the oil after a short warm-up period ensuring that the new system is filled.
EME Part Number: OilCooler400
Siebenrock Part Number: 1142400
Model Year
R65GS (2471)
R80GS (47E1) 01/87-07/90 ECE
R80GS (47E2) 04/90-10/95 ECE
R80GS (47E3) 01/96-12/96 ECE
R80GS PD (47E1) 06/90-07/90 ECE
R80GS PD (47E2) 08/90-06/95 ECE
R80ST (2471)
R80G/S (2471)
R100GS (47E1) 12/86-07/90 ECE
R100GS (47E1) 01/87-03/90 USA
R100GS (47E2) 04/90-07/94 ECE
R100GS 91-95 (47E2) 11/90-09/94 USA
R100GS PD (47E1) 02/89-07/90 ECE
R100GS PD (47E1) 06/89-04/90 USA
R100GS PD (47E2) 08/90-02/96 ECE
R100GS PD 91-95 (47E2) 09/90-12/95 USA
R100R (2473) 03/91-12/95 ECE
R100R (2473) 09/91-12/95 USA