EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads
  • Load image into Gallery viewer, EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads

EnDuraLast Lithium Alternator, Starter, and Ignition Bundle - ALL BMW Airheads

Regular price
$999.00 USD
Sale price
$999.00 USD
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.


THE complete electrical upgrade bundle for your custom BMW Airhead build!
Kit contains the high output, lithium safe EDL4Li alternator, Complete ignition system including coils, plugs, and plug wires, and high performance EnDuraLast starter (BMW-STR1 or BMW-STR1M depending on option selected.)
View the installation guides for the EDL4Li HERE , and the EDL-Igns HERE

NOTE:
The /5 Airhead models require a starter relay modification, please review the installation guides for details.
If your bike is modified with dual spark heads, please let us know and we can accommodate the appropriate component changes needed.
YOU MUST CHOOSE A STARTER, PLEASE CHOOSE FROM THE DROP DOWN MENU BELOW TO SELECT THE CORRECT STARTER FOR YOUR BIKE.
Vehicle Manufacturer:
BMW
Application: BMW Airhead Models
Make/Model: BMW R45, R50, R60, R65, R75, R80, R90, R100 Model Years: 1970 to 1996

EDL4Li Alternator:
  • Updates the BMW Airhead original, under-performing 20 amp (max) alternator and diode board with modern components.
  • The critically important higher amperage output of this system at low engine RPM's allows use of lighting, heating and other accessories to be used without discharging the battery or overloading the original charging system.
  • High-tech permanent magnet rotor will never overheat and short out. Brushless design eliminates worn out rotor slip rings and brushes.
  • Eliminates "burnt out warning light" no-charge condition of Bosch systems
  • MOSFET lithium specific voltage regulator / rectifier housed in machined billet aluminum housing mounts where the original diode board was providing a clean simple installation.
  • Bolts right on and wires up with minimal wiring.
  • Original alternator/engine cover fits over the alternator with no alterations required.
  • Designed and manufactured to modern OEM specifications.
  • Incredible low RPM output of 280 Watts at just 2000 RPM's
Why do you need a different voltage regulator for lithium batteries?
Lithium batteries have different charging requirements than Lead Acid or AGM batteries that can severely affect their lifespan and performance. The key factors in safe and reliable lithium battery charging are the output DC voltage ripple and average output voltage.
The ripple effect is all that matters!
Charging voltage ripple in a powersports application is the difference between the highest and lowest voltages from the voltage regulator output. By nature, a common shunt style voltage regulator will have a fairly high voltage ripple due to the regulation shunt switches opening and closing frequently. Each on/off transition will cause some variation in the output voltage, this is unavoidable. Keeping this to minimum is critical for Lithium batteries. In a perfect world, a ripple of less than 10% of the output voltage (~1.5V for a typical regulator), would be ideal, however is not practical for this type of regulator. The EDL4Li-VoltRect Lithium Specific regulator is able to maintain a less than 4 Volts output ripple, compared to verified test results of our competitors 8 volts. Keep in mind this ripple voltage is only seen via an Oscilloscope sampling the voltage 1000’s of times a second, and is not the same as your average charging voltage as measured by a multimeter.

EDL-IGNS:
  • Modern electronic technology updates the BMW Airhead's under-performing Bosch ignition system.
  • The critically important ignition timing is maintained with a crank-mounted trigger rotating past a micro-size hall effect sensor.
  • Dyno developed advance curves for BMW single- and also dual-spark system can be chosen during installation.
  • The original Bosch ignition system can be left in place.

  • Th
    e Ignition Kit contains the following components:
  • Electronic module, Hall-sensor
  • Crank mounted aluminum disc trigger
  • Wiring and mounting hardware
  • Installation guidelines


  • EDL-Coil3.0OHM:
    • High voltage primary terminals.
    • Ultrasonically welded and sealed against moisture.
    • Compact size fits easily under tank.
    • Peak gap current in excess of 50mA.
    • High impact thermoplastic housing.
    • Over 40,000 volts per output.
    • For stock single spark models only.
    • Included are both styles of coil mounting bracket, only one will be used.


    BMW-WSR18:
    • Copper multi-strand inner core wire.
    • 7mm "classic" black silicone jacket.
    • 5k ohm resistor spark plug covers with terminal stud connector for positive lock on 14mm spark plug stud (nipple nut removed.)
    • Silicone coil plug end.
    • Silicone withstand temperatures up to 1200°F / 650°C

    BP6ES (Pair):
    • Thread Reach: 14mm / 13/16” (20.8mm).
    • Revolutionary surface air gap firing technology featuring four yttrium-enhanced ground electrodes delivers the longest, most powerful spark for ultimate engine performance
    • Four yttrium-enhanced ground electrodes provide optimum access to the air/fuel mixture for the most efficient combustion, plus the yttrium alloy ground electrodes reduce gap wear and oxidation for extended performance life
    • Features Ytrium Center electrode Benefit, Longer performance life V groove ground electrode, increased flame kernel propagation.
    • Electrode gap is factory set to provide ease of installation
    • NON Resistor plug appropriate for the ignition system EDL-IGNS.


    BMW-STR1 or BMW-STR1M:
    The EnDuraLast starter has 70% to 140% more cranking torque than a new Bosch starter with 20% less amperage draw. Your new EnDuraLast starter will provide years of reliable service due to it’s efficient modern technology and design producing the increased power rating. The key features are:
    • Magnet retention includes spring clips to ensure magnets do not become loose.
    • New technology provides lighter (6.5 pounds) starter motor with 70 % higher output than the old Bosch design.
    • More efficient high strength permanent magnets that replace conventional field coils, requiring less amperage to turn the starter over. This allows the battery to provide increased voltage and amperage to the ignition system resulting in faster rpm turnovers and quicker starts with less amp draw on the battery.
    • Will operate where other imitation conversion starters will not due to the Denso gear-reduction starter design having a large solenoid with sliding drive-gear assembly designed for automotive applications with large battery reserves.
    • Features a low-voltage solenoid "pull-in" requirement.
    • Permanent magnet style starter will also retrofit older Bosch field coil starters (0.7 Kw).
    • This starter is application-designed for small batteries.


    IMPORTANT: Ensure you are installing the starter with the correct # of gear teeth on the starter drive to match the model year and ring gear installed on the engine. If the incorrect starter is installed it will damage the new starter and / or the ring gear !

    For applications 1970-1976 with 8-Tooth Drive Gear Pinion, select the BMW-STR1M option
    For applications 1977 on with 9-Tooth drive gear pinion, select the BMW-STR1 option

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)